Air Hawk Tire Inflator Replacement Threaded Collar & Silicone Grommet (2 pcs.) For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Air Hawk Tire Inflator Replacement Threaded Collar & Silicone Grommet (2 pcs.):
Replacement collar and silicone grommet for Air Hawk Tire Inflator. (AIR PUMP NOT INCLUDED)
This threaded collar is 3D printed out of ABS (Acrylonitrile Butadiene Styrene).The silicone grommet presses into the threaded tip of the compressor & grips the brass threads of the inflatorhose when it is screwed into the tip.
NOTE: This is a threaded collar and does NOT fit theAir Hawk Pro, AHP-MC6/2bayonet style pump.
(The manufacturer does not sell replacement parts.)
Air Hawk Grommet & CollarInstructions
Just so you know, the redgrommet is a tight fit inthe nozzle of thecompressor.
The easiest way toinstall it is to lube the outside with one drop
dish washing soapbefore pressing into the nozzle.
Once installed, itwill protrude by 1/8" of an inch.
Then you can screw onthe red plastic collar( but do not tighten down yet).
Screw the brass threaded inflator hose into the redgrommet
Lastly, tighten thered plastic collar.
The compressor is nowready to use.