Baffle Wire Kit for Cessna 172, 170 w/Cont O-300 For Sale

Baffle Wire Kit for Cessna 172, 170 w/Cont O-300
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Baffle Wire Kit for Cessna 172, 170 w/Cont O-300:
$68.00

Stop wasting your time or your A&P\'s time trying to make baffle wires!

Do the math, there are 12 wires needed for most 170/172s and let\'s say it take 5 minutes to make a wire. @$120/hr, that is $120 for wires (however they look) and you still have to find the right springs!

Most folks just go to the hardware store and find a spring that looks close. Any good A&P knows that the right compression spring will reduce chaffing. Our compression springs are custom made to meet the compression requirements.

This baffle wire kit will work on a Cessna 170, Cessna 172 with Continental engine. C172 with a Lycoming engine use 2 to 4 wires depending on the model. Please see the 172 w/Lycoming Kit.

The C172 kit contains

  • 10 each 6\" baffle wires - use to make the 0450211-1, 0450211-2, 0450277-1, 0450277-3, 0450277-5, 0450277-201, 0450277-203, or 0450277-205 wires
  • 2 each 12\" baffle wires - use to make the 0450277-2,0450277-202,
  • 12 each baffle springs
  • Extra 12\" wire, just in case...
  • Wire bending template

These baffle wires are not TSO or PMA parts.

You or your A&P will finish making the baffle wire by cutting the wire to the length needed and using the old wire or the provided template to make the “hook” end. You have assisted in producing the wire making it an owner produced part (FAR 21.9)

The wires and springs are made from zinc coated ASTM A-228 music wire. They were tested against OEM Cessna baffle wires and passed our rigidity, bend retention and dead weight testing.

The last image shows a tip we received from a customer that did not have any of the old wire to use as a template. They installed the straight wire with the spring as normal. Then they pushed on the head of the wire compressing the spring completely and marked the wire where the hole is. Measuring up a 1/4\" they made another mark where they started the bend.



Buy Now

Baffle Wire Kit for Cessna 182, 180 picture

Baffle Wire Kit for Cessna 182, 180

$38.00



6 inch Baffle Wire & Spring for Cessna Aircraft picture

6 inch Baffle Wire & Spring for Cessna Aircraft

$6.75



Baffle Wire Kit - Custom 2ea 12in & 2ea 20in picture

Baffle Wire Kit - Custom 2ea 12in & 2ea 20in

$45.00



Powered by WordPress. Designed by WooThemes