CESSNA ROCKER SWITCH (4-PACK) | REPLACES S2160-1, S1824-1, S2061-1 | NEW For Sale
CESSNA ROCKER SWITCH (4-PACK) | REPLACES S2160-1, S1824-1, S2061-1 | NEW :
BUY MORE; SAVE MORE: 4-PACK
Brand new, surplus stock replacement rocker switch, for Cessna P/N: S2160-1, S1824-1 that are OEM equipment in practically every Cessna 100, 200, 300 series plane manufactured after 1970. Switch is Single-Pole (two terminals); Single-Throw(ON/OFF). Ever wonder why your switches are so sloppy?*Did you know the FAA issued a Mandatory Service Bulletin in July, 2009 requiring replacement of these switches every 4-years if used for switching high-current devices (aka landing,taxi,beacon) Scroll to the end of the listing to read the entire Bulletin.
Manufacturer: Carling TechnologiesType: Miniature Rocker SwitchActuator Color: WhiteBezel Color: BlackContact Form: SPSTSwitch Function: ON - OFFCurrent Rating: 15 AVoltage Rating AC: 125 VACTermination Style: Quick Connect; 0.25"Actuator: RockerMounting Style: PanelBrand: Carling TechnologiesActuator Style: RockerDielectric Strength:UL/CSA:1000V - live to dead metal partsElectrical Life:100,000 cyclesMechanical Life:100,000 cyclesOperating Temperature:32°F to 185°F (0°C to 85°C)SPECIAL AIRWORTHINESSINFORMATION BULLETINSAIB: CE-09-42Date: July 24, 2009IntroductionThis Special Airworthiness Information Bulletin (SAIB) is being issued to advise you of anairworthiness concern on mandatory replacement intervals of Cessna Landing Light, Beacon Light,and Taxi Light switches on Cessna 100, 200, and 300 series airplanes specified per Cessna servicebulletins MEB09-3 and SEB09-6 dated May 11, 2009.At this time, this airworthiness concern is not considered an unsafe condition that would warrant anairworthiness directive (AD) action under Title 14 of the Code of Federal Regulations (14 CFR part39).BackgroundCessna 100, 200, and 300 series airplanes utilize switches in the Landing Light, Beacon Light, andTaxi Light circuits that have been reported failing in the field causing overheating and smoke in thecockpit. There have been reports of burned insulation on the wiring terminals to the switch. On atleast one occasion, there was a small fire in the cockpit. The failure in these applications can beattributed to contact erosion leading to irregular arcing and eventual failure of the switch. The contacterosion has been shown to occur after approximately 4,000 cycles of operation.Cessna service bulletins SEB09-6 and MEB09-3, initial release, dated May 11, 2009, specify thefollowing:• An inspection to determine time-in-service for the switches.• Replacement of switches that have been in service for four or more years with the month andyear of the installation written on the new replacement switch.• The month and year of the initial installation written on switches that have been in service forless than four years.RecommendationsThe FAA recommends that owners, operators, and maintenance technicians do the actions of theabove-referenced service bulletins within the next 400 hours of operation, 12 months, or the nextannual inspection, whichever comes first.