Digital Battery Fuel/Hour Meter/Volt Meter Gauge,Alarm Remind Forklift Golf Cart For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Digital Battery Fuel/Hour Meter/Volt Meter Gauge,Alarm Remind Forklift Golf Cart:
Runleader12V to 48V RL-BI025Battery Discharge Gauge use to lead-acid,GEL ,Lithium iron lithium batteries;Display battery capacity status with 10 segments of LED Bar Graph. This fuel gauges can be used to monitor DC powered equipment such as fork lifts, golf carts, floor care equipment, and any other battery powered equipment.（2-year warranty）
1 Battery States indicator----10-Bar LED indicates different states of the battery
- 10-bar LED displays state-of-charge
- Bar by bar display the battery state-of-charge ,from full to empty
2 Digital Maintenance Hour Meter----hour meter, service timers,hour meter initial time setting
- Hour Meter (TOT): Help you track how many hours you put on your engine
- Total Hours reading displays from 0 to 99,999 Hours, 0.1 hours accuracy,TOT hours are non-resettable.
- Service timers : Countdown tracking time, Reminding maintenance, Like Air filter Replacement
- You can program a start hours (old hour meter data) to replace an old hour meter
3 This gauge provides 9 types discharge curves for you to choose from
- Lead-acid batteries,GEL batteries,Lithium iron phosphate batteries (LiFePO4),“Trojan” new batteries,AGM batteries,18650 lithium batteries
- Voltage range:12V to 48V
- This table uses a 12V battery. The voltage range of 24V 36V 48V is multiplied by 2 or 3 or 4 at a voltage of 12
- When U-24 or U-36 or U-48 is selected, the measured voltage value will change automatically.
4 Set the warning voltage value
- The warning voltage contains high voltage warning and low voltage warning
- After setting the warning voltage value, the Alarm indicator light will light up and display green
- when the warning value is reached, the Alarm indicator light will turn red and flash to remind
- If the warning voltage value is not set, the Alarm indicator light will not light up
- Operation button can be turned off , Data retained after shutdown
- LCD Screen size 40.8×16.8mm with White Backlit.
- Programmable backlit mode: Auto / OFF/ ON
- Easy to install
- Waterproof rating: IP65.
- Timing Range:99999 H Hours Accuracy:0.1 H
- SVC Range:2000 H
- Product Size: 68.5×34.9×17.2mm
- Panel Cut-out Size: 40.8×16.8 mm
- Operating Voltage range:12V to 48V
- Resolution: 10% per LED segment
- Display Screen:10 Segment LED Bar Graph
- N.W.48 G